Channel Configuration
This page is used to configure the parameters for the channel operation modes of your ADSL Modem/Router.
Note: Please
Commit/Reboot
if you want to make this settings effective immediately.
Current ATM VC Table:
Select
Inf
Mode
VPI
VCI
Encap
NAPT
IP Addr
Remote IP
User Name
Droute
Status
Actions
Internet_R_8_35
PPPoE
8
35
LLCSNAP
On
user@runnet.sy
On
Enable
VPI:
VCI:
Encapsulation:
LLC
VC-Mux
Channel Mode
PPPoE
1483 Bridged
1483 MER
PPPoA
1483 Routed
Application Mode
Internet
Admin Status:
Enable
Disable
Enable NAPT
PPP Settings
Login Name:
Password:
Connection Type:
Continuous
Connect on Demand
Manual
Idle Time(min):
WAN IP Settings
Type
Fixed IP
Use DHCP:
Local IP Address:
Remote IP Address:
Subnet Mask:
Unnumbered:
Default Route:
Disable
Enable